Coolers and freezers · Stores, restaurants and farm stands
We drop sensors into your walk-ins, reach-ins and cases and watch the temperatures. We do not touch your refrigeration equipment or its controls.
What it is
A small panel in the back room with a temperature sensor in every cooler and freezer, and a dashboard on your phone that alerts you when a box gets warm.
It works with any refrigeration equipment, including simple remote condensing units with no controller, and it does not disturb your refrigeration contractor's work.
Interested? Request a callbackEach cooler, freezer and case by name, with colour for normal, defrost and alarm.
A limit for each box, with a delay so a defrost or a busy door does not set it off.
A trend line for every box that shows when a problem started and how long it lasted.
A power-loss alert at night gives you time to act before the product is gone.
Standard system
Door switches and extra sensors can be added per box and are quoted separately.
Alerts
| Alert | What sets it off |
|---|---|
| High temperature | A box stays above its limit for longer than the delay you set. |
| Low temperature | A cooler drops below its limit, before product freezes. |
| Sensor fault | A sensor is unplugged or stops reading. |
| Power failure | Building power lost, and again when it returns. |
| Panel offline | The panel itself stops reporting. |
Limits and delays are set per box and can be changed at any time.
Northside Market, our demonstration store. Every box shows its temperature: green in range, blue in defrost, red in alarm.
The dashboard
We draw your layout once. After that, one look tells you which box has a problem. Tap any box for its history.
A two hour trend for one cooler, with its target in green and its alarm limit in red. Demonstration data.
Going further
Monitoring with our own sensors is where most sites start. Where the store has a refrigeration controller, the same dashboard can also show each circuit's status, defrosts and settings, and the compressor racks.
This is a separate package, set up with your refrigeration contractor and quoted per store.
A circuit page from the demonstration store.
Refrigeration service
If a box alarms and you do not already have a refrigeration contractor, we can service it. If you do, we send them the alert and stay out of the way.
Ask about serviceService is by arrangement. Tell us what you have and where you are and we will tell you what we can cover.
Common questions
No. The sensors are our own and sit in the refrigerated space.
No. The panel carries its own cellular connection.
Whoever you choose: the owner, a manager, your refrigeration contractor. Each can have a login.
Monitoring tells you and the people you name. If you have a refrigeration contractor, repairs stay with them. If you do not, ask us about service.
A one-time price for the panel and sensors, then a monthly monitoring fee. Both depend on how many points you want watched, so call for a quote.
Where we work
Get in touch
Tell us how many coolers and freezers you have. We will come back with a price.
What else we offer
Bulk tank temperature and cooling time, wash water, hot water, vacuum, plate cooler and power.
Explore→Vacuum at the pump and in the woods, sap tank levels, pump house temperature and power at remote sites.
Explore→Boiler and tank temperatures, fire out, freeze risk, pumps and power, for wood, solar, oil and gas systems.
Explore→Tell us what the equipment has to do. We write and test the program and send it to you to load.
Explore→